Pulse Cooling Logo
CITO Products, Inc.

Home
News
Technology
Temp.Controllers
Sensor Selection
Flow Products
Manifolds
Support
About Us

 

 

 

 

  CITO Products, Inc.
N8779 Hwy. X
P.O. Box 90
Watertown, WI 53094
USA
Tel: 920-261-2606
Fax: 920-261-1350
sales@pulsecooling.com
support@pulsecooling.com
PulseCooling Temperature Controller
Pulse Cooling Only
  Single Zone  
DD

Systems for temperature application: < 200 F

  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted

SPC

Systems for temperature application: < 200 °F

  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
  5 Zones  
PC5-VKA

Systems for temperature application: < 400 °F

  • Controller for up to 5 Zones
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
PC05

Systems for temperature application: < 400 °F

  • Controller for up to 5 Zones
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
  10 Zones  
PCR10

PCR10

Systems for temperature application: < 400 °F

  • Controller for up to 10 Zones
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
Pulse Cooling and Heating
PC5-VKA-ZH

PC5-VFA
Electric Heating  and Pulse Cooling

Systems for temperature application: < 400 °F

  • Controller for up to 5 Zones
  • 2 Zones Heating
  • 3 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
PC5-VFA

PC5-VFA
Water Heating  and Pulse Cooling

Systems for temperature application: < 400 °F

  • Controller for up to 5 Zones
  • 2 Zones Heating
  • 3 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
Pulse Cooling with Pre-Heating
WHU

WHU
Water Heating and Pulse Cooling

Systems for temperature application: <400 °F

  • Controller for up to 10 Zones
  • 2 Zones Heating
  • 3 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
EH20

EH58
Electric Heating and Pulse Cooling

Systems for temperature application: < 400 °F

  • Controller for up to 10 Zones
  • 4 Zones Heating (20 KW)
  • 10 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
EH58

EH58
Electric Heating and Pulse Cooling

Systems for temperature application: < 400 °F

  • Controller for up to 10 Zones
  • 4 Zones Heating (58 KW)
  • 10 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
Injection Blow Molding
PHC4

PHC4
Water Heating and Pulse Cooling

Systems for temperature application: < 230 °F

  • Controller for up to 5 Zones
  • 2 Zones Heating
  • 2 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
PC5-VFA

PC5-VFA
Electric or Water Heating and Pulse Cooling

Systems for temperature application: < 230 °F

  • Controller for up to 5 Zones
  • 2 Zones Heating
  • 3 Zones Cooling
  • Direct Mold Surface Temperature Control
  • Programmable for mold surface and waterline sensor
  • Consistently higher part quality
  • Consistently better cycle
  • Machine Mounted
         
                Copyright 2015 CITO Products, Inc.